The highest quality cloth for use with all Howard Products.
Used for cleaning, dusting, restoring, polishing, burnishing, etc.
1. NON-SCRATCHING
2. 100% NEW MATERIAL
3. LONG LASTING
4. PRE-WASHED, SOFT & ABSORBENT
5. REUSABLE
6. Net Wt 1 Lb. MADE IN THE U.S.A.
A tip regarding Howard's Steel Wool...
Howard's Super Fine Steel Wool (#0000) is the finest yet strongest cabinetmakers grade steel wool available anywhere. Made in the long strand method, this very soft steel wool is padded, so that all you do is to pour Restor-A-Finish right into the pad and proceed to apply it directly onto the furniture you are restoring with safety and ease. Also use this superfine yet tough steel wool to apply Feed-N-Wax or Citrus Shield to raw or stripped wood for the perfect natural finish.
Use Howard #0000 Steel Wool when restoring or finishing timber furniture
Howard's Super Fine Steel Wool (#0000)
This is the finest yet strongest cabinetmakers grade steel wool available anywhere. Made in the long strand method, this very soft steel wool is padded, so that all you do is to pour Restor-A-Finish right into the pad and proceed to apply it directly onto the furniture you are restoring with safety and ease. Also use this superfine yet tough steel wool to apply Feed-N-Wax or Citrus Shield to raw or stripped wood for the perfect natural finish.
Use with Howard's other fine furniture care products for professional results.
Howard Products Steel Wool is the finest steel wool available for the application of RESTOR-A-FINISH, FEED-N-WAX & CITRUS SHIELD PREMIUM PASTE WAX. Howard's super fine (0000) steel wool is excellent for use on both finished and unfinished wood surfaces. Always use with caution.
Restor-A-Finish - For white heat rings and water marks, first lightly saturate a pad with the appropriate color of Howard Restor-A-Finish. Rub gently in the direction of the wood grain. Since finishes vary in hardness, test pressure to be used on an inconspicuous spot. Cover a small area at a time and wipe dry immediately. Buff dry using a clean cloth.
* CAUTION: Steel wood may dull a high glass finish.
Feed-N-Wax - For oiled or unfinished wood surfaces, saturate a pad of steel wool with Feed-N-Wax and rub back and forth with the wood grain. Let stand for about 20 minutes and then buff dry with a soft cloth.
Citrus-Shield Premium Paste Wax - Apply an even coat of paste wax to the wood surface with circular motions. Wait 5 to 8 minutes or until wax becomes tacky. Buff to a shine with a clean, dry, soft cloth.
Last updated November 26, 2008